Waste Management System
Set for processing and temporarily storage of waste water. The polyethylene tank with a capacity of 30 litres, is equipped with a macerator pump, a see-through inspection shutter and an electronic touch pad control panel. On this panel you can read out the water level in eight level increments to full. When the tank is full for three-quarters, a warning LED will blink. If you think this blinking is unpleasant, you can turn on the "sleep mode". Then the warning LED starts blinking again when the waste water level in the tank changes.
If you want to evacuate the waste water, you have to push the button for three seconds. This three second delay feature makes sure no accidental operation will occur. The pump automatically stops when the tank is empty, or if no water is moved. In this way the motor is protected from damage.
| Dimensions | : | L x d x h = 360 x 470 x 310 mm |
| Connections | : | inlet port = 11/2" (38 mm), dockside evacuation port = 11/2" (38 mm), vent connection = 3/4" (19 mm) |
| Waste Water Management |
12 |
16 |
11 |
38110-0092 |
| Waste Water Management |
24 |
8 |
11 |
38110-0094 |
